The landscape lighting used in different places is different. Today, the landscape lighting manufacturer Tongde Lighting will take you to know more about it.

The lighting of trees

1. Flood lights are generally placed on the ground, and the arrangement is determined according to the type and appearance of the trees;

2. If you want to illuminate a higher position on the tree, you can place a metal pole with the same height as the lighting position next to the tree to install the lamp;

3. Install a series of low-power incandescent light bulbs or LED lamp beads on the main branches of deciduous trees to obtain decorative effects;

4. For the flood light that must be installed on the tree, the installation ring attached to the tree branch must be able to adjust according to the growth law of the plant;

5. The lighting of trees should pay attention to art.

two. Lighting of flower beds

1. For flower beds on the ground plane, the so-called magic valley lamps are used to illuminate downward. The lamps are often placed in the center or edge of the flower beds, and the height of the lamps depends on the height of the flowers;

2. The light sources are commonly used incandescent lamps, compact fluorescent lamps, metal halide lamps and LED light sources, and light sources with a relatively high color rendering index are used.

three. Decorative lighting of statues

1. The number and arrangement of illumination points depends on the type of the illuminated target;

2. Determine the position of the lamp according to the position of the illuminated target and its surrounding environment

3. For statues, always illuminate the main part of the face and the front of the statue. When choosing the irradiation direction, avoid shadows on the statue's face;

4. For some sculptures, the color of the light should be coordinated with the color of the sculpture material.

four. Waterscape lighting

1. Lighting of still water and lakes: the lamps illuminate the scene on the shore, which can form a reflection on the water surface; objects on the opposite bank can be illuminated by floodlights immersed in water; for dynamic water surfaces, floodlights can be used to directly illuminate the water surface ;

2. Illumination of the fountain: In the case of water jetting, install the floodlights behind the spout in the pool or below the drop point where the water falls back into the pool, or install lights in both places. The three primary colors of red, blue and yellow are often used, followed by green;

3. Lighting of waterfalls: For water flows and waterfalls, lamps should be installed at the bottom of where the water flows.

Through the above introduction, I believe that everyone has some understanding of the lighting design of garden landscape lights. The main products of landscape light manufacturer Guangdong Tongde Lighting Co., Ltd. are: high pole lights, LED street lights, garden lights, smart street lights, stainless steel lights, Chinese lights, landscape lights , sculpture lights, LED solar street lights, power poles, road traffic lighting equipment, monitoring poles, European garden lights, lawn lights, underwater lights, wall lights, LED fountains, LED spotlights, simulation art audio lights and other tens of thousands of products, welcome everyone Consult to understand.

Part of the content of this article is organized from the network sharing, if there is any infringement, please contact the editor to delete it.