通用banner
Your current location : Home >> News >> Technical Information

KeywordsKeywords

ContactContact Us

Guangdong Tongde Lighting Co., Ltd.

Contact person: Mr. Li

Mobile: 18128207876

Hotline: 400-0760-789

QQ email: 316567721@qq.com

QQ:316567721

web:en.tongdelight.com

Factory address: No.6 Beiyuan Road, high tech Zone, Waihai street, Jiangmen City, Guangdong Province

Store address: card 5-11, building B, Caoer international street lamp city, Guzhen Town, Zhongshan City

What should I pay attention to before installing the LED underground light?

2021-05-29 09:50:18
a

The construction quality problems of buried lamps or underwater lamps are mainly the water seepage of the lamps and the water seepage of the junction box in the middle of the line. Therefore, when planning the construction scheme of buried lamps or underwater lamps, the power supply line should be connected with a suitable way to minimize the number of intermediate joints;


When the intermediate joints are unavoidable, try every means to centrally set up junction boxes at suitable locations on the ground. The power side connectors of the lamp head wires of each lamp are concentrated in the junction box connection; when the lamps are disassembled, packaged, and wired on site, due to the environment and improper operation Other reasons may reduce the sealing level of the lamp, leaving hidden quality hazards. If necessary, the product is required to be equipped with a light source and a sufficient length of lamp cap cord. This is very important. Therefore, a reasonable and comprehensive construction plan is of great significance to improving the quality of the project.



1. Before installing the LED underground light, the power supply must be cut off. This is a step in the installation of all electrical equipment and the basis for safe operation.


2. Before installing the LED underground lamp, the various parts and components used in the lamp should be sorted out. LED underground light is a special landscape LED light that is buried underground. Once installed, it is very troublesome to install less parts and want to reinstall it. So it should be prepared before installation.


3. Before installing the LED underground lamp, you should first dig a hole according to the shape and size of the embedded part, and then fix the embedded part with concrete. The embedded part plays the role of isolating the main body of the LED underground lamp from the soil, and can ensure the service life of the LED underground lamp.


4. Before installing the LED underground lamp, you should prepare an IP67 or IP68 wiring device to connect the external power input to the power cord of the lamp body. Moreover, the power cord of the LED underground lamp requires the use of a VDE-certified waterproof power cord to ensure the service life of the LED underground lamp.


Contact

Factory address: No.6 Beiyuan Road, high tech Zone, Waihai street, Jiangmen City, Guangdong Province

Store address: card 5-11, building B, Caoer international street lamp city, Guzhen Town, Zhongshan City

Mobile: 18128207876 (Mr. Li)

Hotline: 400-0760-789

QQ email: 316567721@qq.com

QQ:316567721